Hikvision ip camera installation and configuration pdf
IP cameras HIKVISION - activation and connection
When you purchase an IP camera, it's necessary to make it work in your network and sometimes this task can be daunting for beginners or inexperienced users. No worries, configuring an IP camera is not rocket science. There are a lot of different IP camera brands out there, but the configuration process is similar to all of them. In this article, I will teach you how to configure Hikvision IP camera. OK, the first thing I want to show you is how an IP camera can be part of your network.
It can be hard understanding the problems that occur with your CCTV , which is why our friendly team have put together a guide to help you to fix the issues. Sometimes a problem can be as simple as a disconnected lead and it might even be that the network is currently down. Internet protocol IP cameras generally have LED indicators that are used for transmitting data across to the network but this might be hidden inside the camera. If the LEDs on the camera are not lighting up, you should check to see if the camera is powered externally plugged into the wall. Should your camera be powered via electricity and not battery, you will want to check that the camera is receiving the appropriate wattage as a complicated camera such as a pan-tilt-zoom, will require more watts that a normal plug will supply. If it does, check to see if the device you are using is on the same network as your camera.
IP camera network diagram
This is a streamlined version of the driver we use for the other cameras and will offer limited functionality as far being able to configure the camera through the ESM Admin UI. The stream portion main and sub indicate two separate streams on the camera. The main stream offers high resolutions and the sub stream offers low resolutions. We will be showcasing h streaming over the sub stream. Name the camera. Enter the streaming address in the MAC field. Authenticate and select appropriate archive server settings.